-40%
Ubiquiti UniFi AP (UAP) Wireless Access Point Indoor With PoE Injector
$ 18.47
- Description
- Size Guide
Description
INCLUDED ITEMS:
Only what you see in the pictures is included and nothing else! No additional accessories included!
(1) Ubiquiti UniFi Access Point (UAP)
(1) 24V PoE Injector and power cable (100Mb)
(1) White plastic Mounting Bracket
CONDITION NOTES
: All units are in indoor used condition and may have slight fading or discoloration to the exterior of the unit. All units have been engineer tested, reset to factory settings, and upgraded to the most current firmware available to ensure easy adoption into existing environments.
Long Term Support/EoL:
This
Device will receive critical bug fixes and security updates, it will remain compatible with stable controller releases, and it may receive new features up until 3/1/21.
After 3/1/21
this device will become
End of Life, and will be visible, but not configurable, in controllers released after the EOL date. It will continue to operate with its current configuration, and the controller will be able to forget the device.
Dimensions
200 x 200 x 36.5 mm
Weight
290 g
Networking Interface
(1) 10/100 Ethernet Port
Buttons
Reset
Antennas
2 Integrated (Supports 2x2 MIMO with Spatial Diversity)
Wi-Fi Standards
802.11 b/g/n 2.4 GHz
Power Method
Passive Power over Ethernet (12-24V)
Power Supply
24V, 0.5A PoE Adapter Included
Maximum Power Consumption
4 W
Max TX Power
20 dBm
BSSID
Up to Four Per Radio
Power Save
Supported
Wireless Security
WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i
Certifications
CE, FCC, IC
Mounting
Wall/Ceiling
Operating Temperature
-10 to 70°C
Operating Humidity
5 - 80% Condensing
ADVANCED TRAFFIC MANAGEMENT
VLAN
802.1Q
Advanced QoS
Per-User Rate Limiting
Guest Traffic Isolation
Supported
WMM
Voice, Video, Best Effort, and Background
Concurrent Clients
100+
SUPPORTED DATA RATES (MBPS)
802.11n
6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
802.11b
1, 2, 5.5, 11 Mbps
802.11g
6, 9, 12, 18, 24, 36, 48, 54 Mbps